OPERATING YOUR BREVILLE PROFESSIONAL 800 COLLECTION™ ESPRESSO MACHINE (continued)

PROGRAMMED ESPRESSO – DOUBLE CUP

Press the two cup button once. After a few seconds, aromatic coffee will begin to brew into the cup. A pumping noise will be heard in this operation. The machine will automatically stop once the preset pour has been delivered.

NOTE: The minimum pour for

one cup and two cups

is set at 15ml.

NOTE: Pressing the one cup or

two cup buttons during a programmed espresso will immediately stop the pour.

PROGRAMMING SINGLE ESPRESSO

1.Prepare to make a single cup of espresso by following steps 2 to 6 in ‘Operating your Espresso Machine’, pages 14-16.

2.Place your cup underneath the group head.

3.To begin programming, press the ‘PROGRAM’ button once. The machine will beep once and the program button will begin to fl ash. This indicates the machine is in programming mode.

4.Press the one cup button once. The machine will commence normal pour function, and the one cup button surround will begin to fl ash.

5.When the desired amount of espresso has poured into the cup, press the one cup button to stop the pour. The machine will beep twice, indicating it has saved your measured pour quantity and exited programming mode.

PROGRAMMING DOUBLE ESPRESSO

1.Prepare to make a two cup of espresso by following steps 2 to 6 in ‘Operating your Espresso Machine’, pages 14-16.

2.Place your cup underneath the group head.

3.To begin programming, press the

‘PROGRAM’ button once. The machine will beep once and the program button will begin to fl ash. This indicates the machine is in programming mode.

4.Press the two cup button once. The machine will commence normal pour function, and the two cup button surround will begin to fl ash.

5.When the desired amount of espresso has poured into the cup, press the

two cup button to stop the pour. The machine will beep twice, indicating it has saved and exited programming mode.

RESETTING DEFAULT VOLUMES

To reset the machine to the default one and two cup pour quantities, press and hold the program button, until the machine beeps three times. Release button. This indicates the machine has returned to its original default settings.

NOTE: Default settings: one cup pour is approximately 30ml. Two cups

is approximately 60ml.

17

BES820 IB V6.indd 17

19/9/0719/9/07 2:23:512:23:51 PMPM

Page 17
Image 17
Breville BES820 manual Programming Single Espresso, Programming Double Espresso, Resetting Default Volumes