JBL AVR480 manual FRONT-PANEL Information Display, Speaker/Channel Input Indicators

FRONT-PANEL INFORMATION DISPLAY

ABitstream Indicators B Optical Source Indicators C DTS Mode Indicator D Dolby Digital Indicator

E Coaxial Digital Input Indicators F Dolby Pro Logic II Indicator G Analog Input Indicator

ABitstream Indicators: When the input is a digital source, one of these indicators will light to display the specific type of signal in use.

BOptical Source Indicators: These indicators light to show when an Optical Digital Input has been selected.

CDTS Mode Indicator: This indicator lights when the DTS mode is selected.

DDolby Digital Indicator: This indica- tor lights when the Dolby Digital mode is selected.

ECoaxial Digital Input Indicators: These indicators light to show when a Coaxial Digital Input has been selected.

FDolby Pro Logic II Indicator: This indicator lights when one of the Dolby Pro Logic II modes has been selected.

GAnalog Input Indicator: This indica- tor lights when an analog input source has been selected.

HDolby 3 Stereo Indicator I DSP Mode Indicator J Tuned Indicator

K Main Information Display L Night Mode Indicator M Auto Indicator

N Speaker/Channel Input Indicators

HDolby 3 Stereo Indicator: This indi- cator lights when the Dolby 3 Stereo Mode has been selected. Only the ST (Stereo) portion of this indicator will light when “Surround Off” has been selected. Then all Surround Modes are turned off and the unit will play in pure stereo mode.

IDSP Mode Indicator: This indicator lights when any of the surround modes created by Digital Signal Processing, or DSP are in use. These modes include Hall 1, Hall 2, Theater and 5-Channel Stereo.

JTuned Indicator: This indicator lights when a station is being received with suffi- cient signal strength to provide acceptable listening quality.

KMain Information Display: This dis- play shows messages relating to the sta- tus, input source, surround mode, tuner, volume level or other aspects of the unit’s operation.

OPreset Number/Sleep Timer P Preset Indicator

Q Sleep Indicator R Memory Indicator S Stereo Indicator

T Logic 7 Mode Indicators

LNight Mode Indicator: This indica- tor lights when the AVR480 is in the Night mode, which preserves the dynamic range of digital program material at low volume levels.

MAuto Indicator: This indicator lights when the tuner’s Auto mode is in use.

NSpeaker/Channel Input Indicators: These indicators are multipurpose, indicat- ing either the speaker type selected for each channel or the incoming data-signal configuration. The left, center, right, right surround and left surround speaker indica- tors are composed of two boxes, while the subwoofer is a single box. When the let- ters flash, the digital input has been inter- rupted (see pages 20 and 27 for more information on the Channel Indicators).

OPreset Number/Sleep Timer: When the tuner is in use, these numbers indi- cate the specific preset memory location in use (see page 31 for more information on preset stations). When the Sleep func- tion is in use, these numbers show how many minutes remain before the unit goes into the Standby mode.

8