Video 2 Video Input: Connect this
jack to the PLAY/OUT composite video jack on a second VCR or other video source.
Video 2 Audio Inputs: Connect
these jacks to the PLAY/OUT audio jacks on a VCR or other video source.
Video Monitor Outputs: Connect
these jacks to the composite and/or S- Video input of a TV monitor or video pro- jector to view the output of any video source selected by the receiver’s video switcher.
If you would like to make an
the DVD | , you may use |
the Video Monitor Output |
|
jack when connected to a compatible |
recording device. However, you will not be able to monitor the video signal from your video display.
TV Audio Inputs: Connect these jacks to the Audio Out jacks on a TV or other video source.
Surround Speaker Outputs: Connect these outputs to the matching + or – terminals on your left and right sur- round speakers. When making speaker connections always make certain to maintain correct polarity by connecting the colored (+) terminals on the AVR480 (see chart above) to the red (+) terminals on the speakers and the black
Front/Center Speaker Outputs: Connect these outputs to the matching + or – terminals on your front/center speak- ers. When making speaker connections, always make certain to maintain correct polarity by connecting the colored (+) ter- minals on the AVR480 (see chart above) to the red (+) terminals on the speaker and the black
AC Power Cord Jack: Connect the AC power cord to this jack when the installation is complete. To ensure safe operation, use only the power cord sup- plied with the unit. If a replacement is required it must be of the same type and capacity.
Depending on the electrical requirements in your area or the wiring in your home, the power cords included with your AVR may not be the correct ones, and you may need to contact your local JBL distributor to obtain the correct power cord.
AM Antenna: Connect the AM loop antenna supplied with the receiver to these terminals. If an external AM antenna is used, make connections to the AM and GND terminals in accordance with the instructions supplied with the antenna.
FM Antenna: Connect the supplied indoor or an optional external FM antenna to this terminal.
Region Selector: Select the position corresponding to the country in which the AVR will be used (C, S or K) so that the video standard and the FM tuner’s fre- quency increments will be correct. (See page 31 for more information on setting the Region Selector .)
IMPORTANT NOTE: Any adjustments made to the Region Selector will not take effect unless the unit is first fully turned off by pressing the Main Power Switch 1 until it pops out and the word “OFF” appears on the top of the button.
11