A LIFETIME OF EXPERIMENTATION (continued)
PROGRAMMING DOUBLE ESPRESSO
Press the two cup 
button once. A preset dose of approx 60mls will be delivered. A pumping noise will be heard in this operation. The machine will automatically stop once the preset pour has been delivered.
NOTE: Pressing the one cup 
or two cup 
buttons during a programmed espresso will immediately stop the
pour.
1.Prepare to make a single cup of espresso by following steps 2 to 6 in ‘A Minute to Learn’ on pages
2.Place your cup underneath the group head.
3.To begin programming, press the ‘PROGRAM’ button once. The machine will beep once and the program button will begin to flash. This indicates the machine is in programming mode.
4.Press the one cup 
button once. The machine will commence normal pour function, and the one cup button surround will begin to flash.
5.When the desired amount of espresso has
poured into the cup, press the one cup
button to stop the pour. The machine will beep twice, indicating it has saved your measured pour quantity and exited programming mode.
1.Prepare to make a two cup of espresso by following steps 2 to 6 in ‘A Minute to Learn’ on pages
2.Place your cup underneath the group head.
3.To begin programming, press the ‘PROGRAM’ button once. The machine will beep once and the program button will begin to flash. This indicates the machine is in programming mode.
4.Press the two cup 
button once. The machine will commence normal pour function, and the two cup button surround will begin to flash.
5.When the desired amount of espresso has poured into the cup, press the two cup 
button to stop the pour. The machine will beep twice, indicating it has saved and exited programming mode.
39
