CARE AND CLEANING (continued)
CLEANING THE STEAM WAND AND FROTHING ATTACHMENT |
|
| ||
1 | 2 | 1 | 2 | 3 |
Cleaning |
| Tough |
|
|
the |
| Build |
|
|
Steam |
| Ups? |
|
|
Wand |
|
|
|
|
Remove Attachment | Clean Hole with Pin | Remove Wand Tip | Soak Tip Overnight | Replace Tip |
•The steam wand and frothing attachment should always be cleaned after frothing milk.
•Remove the frothing attachment and rinse in warm tap water.
•Wipe the steam wand with a damp cloth, and then with the steam wand directed back into the drip tray, briefly set the steam dial to the ‘STEAM’ position. This will clear any remaining milk from inside the steam wand.
•Ensure the steam dial is in the ‘OFF’ position. Press the POWER button to off and allow the machine to cool.
•If the steam wand remains blocked, use the pin on the cleaning tool to clear the opening.
•If the steam wand continues to be blocked, the tip of the steam wand can be removed by using the fitting in the middle of the cleaning tool.
•Unscrew the top with the cleaning tool.
•Soak the tip in hot water before using the pin on the cleaning tool to unblock. Replace the tip back onto the steam wand and secure with the cleaning tool.
49