Operating your Breville ikon™ Froojie™ Juice Fountain®
continued
Use the speed selector table located on the pulp container for a quick and convenient juicing reference.
Note
Step 5
Press the ‘On/Off’ switch on the control panel to ‘On’. The juicer will start to operate at the selected speed. The speed can be changed at any time during the juicing process by adjusting the variable speed control dial.
After 3 minutes, the LCD display will automatically turn off if the ‘On/Off’ switch is not turned ‘On’, or a speed is not selected.
Note
Step 6
With the motor running, place food into the feed chute and use the food pusher to gently guide food down. To extract the maximum amount of juice, always push the food pusher down slowly.
The ikon™ Froojie™ Juice Fountain® will automatically stop operating if the motor is stalled for more than 10 seconds. This is a safety feature. Either too much food is being processed at one time or the pieces are not small enough. Try trimming food, cutting food into smaller pieces of even size and/or processing a smaller amount per batch.
To continue juicing, reset the Juice Fountain Plus by pressing the ‘On/Off’ switch on the control panel to ‘Off’, switch off at power outlet and remove power cord from power outlet, then clear the feed chute, finally plug power cord back into power point and switch on at power outlet. Turn the appliance back on by pressing the ‘On/Off’ switch to ‘On’.
Note
Step 7 - Using the Juice Extractor
As fruit and vegetables are processed, juice will flow into the juice jug and the separated pulp will accumulate in the pulp container.
The pulp container can be emptied during juicing by turning the ikon™ Froojie™ Juice Fountain® ‘Off’ at the control panel and then carefully removing the pulp container. Replace the empty pulp container into position before continuing to juice.
Do not allow the pulp container to overfill as this may affect the operation of the appliance.
To minimise cleaning, line the pulp container with a plastic freezer bag to collect the pulp. Pulp can then be used in other dishes (see page R12), or as compost for the garden or discarded (see page 17).
To include the froth in with your juice, simply remove the lid of the juice jug when pouring juice into the glass.
Note
Step 8 - Using the Froojie™ Extractor
When using the Froojie™ Extractor Froojie™ will flow into the juice jug. There will be no pulp extracted into Pulp Container.
Some fruit Froojie™ may be left in the juice collector. This is normal. The amount left over will vary depending on ripeness and hardness of fruit.
Note
Warning: NEVER USE FINGERS,
HANDS OR OTHER UTENSILS TO PUSH FOOD DOWN THE FEED CHUTE OR TO CLEAR THE FEED CHUTE DURING OPERATION. ALWAYS USE THE FOOD PUSHER PROVIDED.
14
