Breville ES6SXL /A, ESP6SXL manual Care And Cleaning, Cleaning the Steam Wand and Froth Enhancer

Models: ESP6SXL ES6SXL /A

1 44
Download 44 pages 8.7 Kb
Page 15
Image 15
CARE AND CLEANING

CARE AND CLEANING

Before cleaning, ensure the Selector Control is in the ‘STAND BY’ position. Unplug the appliance from the power outlet and allow the unit to cool.

Cleaning the Steam Wand

and Froth Enhancer

1.The Steam Wand and Froth Enhancer should always be cleaned after frothing milk.

2.Remove the Froth Enhancer and rinse under warm tap water.

3.Wipe the Steam Wand with a damp cloth.

4.Briefly set the Selector Control to the ‘STEAM’ position to clear any remaining milk from the steam wand.

5.If the Steam Wand becomes blocked, wait for the machine to cool before using the pin on the Cleaning Tool to clear the opening. (see illustration below)

6.If the Steam Wand continues to be blocked, the tip of the Steam Wand can be removed by using the spanner in the middle of the Cleaning Tool. (see illustration below)

7.Soak the tip in hot water before using the pin on the Cleaning Tool to unblock. Replace the tip back onto the Steam Wand and secure with the Cleaning Tool.

Cleaning the Housing /

Cup Warming Tray

1.The outer housing can be cleaned with a soft, damp cloth (do not use abrasive agents or cloths which can scratch the surfaces).

Cleaning the Filters, Filter Holder and Brewing Head

1.Directly after use, remove used coffee grounds and rinse the stainless steel filters and filter holder under running water. Then place the empty filter and filter holder back onto the machine and brew water through it for 10-15 seconds. Should the fine holes in the filters become blocked, then a normal dishwashing brush should be used (do not use a brush with metal bristles).

2.The brewing head should be wiped with a damp cloth to remove any old espresso grounds.

3.It is advisable to periodically run water through the unit with the filter in place but without any coffee to clean out any old coffee grounds.

Cleaning the Drip Tray

1.The drip tray should be removed, emptied and cleaned at regular intervals, particularly when the water level indicator is exposed, indicating the drip tray is full.

2.Remove the grid, steam baffle and water level indicator from the drip tray; wash all 4 parts with water and non- abrasive washing liquid before rinsing and drying.

NOTE:

Do not place any of the components in the dishwasher.

DO NOT IMMERSE ANY PART

! OF YOUR BREVILLE ESPRESSO MACHINE IN WATER OR ANY OTHER LIQUID.

15

Page 15
Image 15
Breville ES6SXL /A Care And Cleaning, Cleaning the Steam Wand and Froth Enhancer, Cleaning the Housing Cup Warming Tray