KNOW YOUR WATER PUMP
KNOW YOUR WATER PUMP - MODEL 073001
Read this owner’s manual and safety rules before operating your water pump.
Compare the illustrations with your water pump, to familiarize yourself with the locations of various controls and adjustments. Save this manual for future reference.
Fuel Tank
Priming Plug
Discharge Outlet | Fuel Shutoff Valve |
Pump Chamber
Suction Inlet 
Serial Number Label
Water Drain Plug
Choke Lever
Air Cleaner 
Starter Handle
Oil Fill Cap
Engine Speed Lever | On/Off Switch |
Air Cleaner — Protects engine by filtering dust and debris out of intake air.
Choke Lever — Used when starting a cold engine. Discharge Outlet — Connect discharge hose here. Engine Information (not shown) — Stamped on valve cover. Provides model, type and trim number of engine. Please have these readily available when calling for assistance.
Fuel Shutoff Valve — Used to turn fuel supply on and off to engine.
Fuel Tank — Capacity of one (1) U.S. gallons.
Oil Fill Cap — Check and fill engine with oil here.
On/Off Switch — Set this switch to "On" before using starter handle. Set switch to "Off" to switch off engine.
Priming Plug — Fill pump with water here to prime pump before starting.
Pump Chamber — Be sure to fill with water before starting.
Serial Number Label — Provides model, revision and serial number of water pump. Please have these readily available when calling for assistance.
Starter Handle — Used to start the engine.
Strainer Basket (not shown) — Used to limit passage of abrasive materials into the pump.
Suction Inlet — Connect reinforced suction hose here. Engine Speed Lever — Used to adjust engine speed to control pump output.
Water Drain Plug — Remove to drain water from pump and flush internal components with clean water.
5
