S200X 25HP & 27HP - 61” Mower Deck
Parking Brake
Adjustment
1.Disengage the PTO, engage the parking brake, stop the engine and remove the ignition key.
2.Locate the brake spring (A, Figure 35).
3.With the parking brake engaged, measure the compressed spring length. The spring should be 2” -
4.If the spring is not within this range, release the parking brake and turn the adjustment nut (B) to compress or release the spring.
5.Engage the parking brake and remeasure the spring.
CAUTION
Do not adjust the spring to be shorter than
| 2" - |
| (5,0 - 5,4cm) |
A | B |
Figure 35. Parking Brake Adjustment
A.Brake Spring
B.Adjustment Nut
TP | 18 | 7/2007 |