S200X 25HP & 27HP - 61” Mower Deck
Quick Setup List -
Page | Setup Procedure | Steps to Perform | |
3 | Uncrating | ❏ | Remove Crate & Banding. |
|
| ❏ Loosen Hydraulic Release Valves. | |
|
| ❏ Release Parking Brake and Roll Tractor forward off skid. | |
|
| ❏ Tighten Hydraulic Release Valves. | |
|
|
|
|
3 | Battery Installation | ❏ | Install Battery. |
|
|
|
|
4 | Tractor Assembly | ❏ | Assemble the Motion Control Handles. |
|
| ❏ | Assemble the Seat. |
|
|
|
|
5 | Roll Bar Assembly | ❏ | Install the Roll Bar. |
|
|
|
|
6 | Check Fluid Levels | ❏ | Check Engine Oil level. |
|
| ❏ Check Hydraulic Oil level. | |
|
| ❏ | Check Tire Pressure |
|
|
|
|
7 | Mower Assembly | ❏ | Check Blade Bolt Torque. |
|
| ❏ Install Deck Pusher Bars (72” Models). | |
|
| ❏ Install the Mower Deck (72” Models). | |
|
| ❏ Check & Adjust Deck Lift Rod Timing. | |
|
| ❏ Check & Level Mower Deck. | |
|
| ❏ Check Deck Drive Belt. | |
|
|
|
|
12 | Lubrication & | ❏ | Lubricate all grease & oil points. |
| Fuel Preparation | ❏ | Add fuel. |
|
| ❏ | Start the Engine. |
|
|
|
|
14 | SAFETY CHECKS | ❏ | Check for LOOSE HARDWARE. |
|
| ❏ Check all OPERATOR CONTROLS. | |
|
| ❏ Perform SAFETY INTERLOCK SYSTEM CHECK. | |
TP | 2 | 7/2007 |
