End of Season and Storage
WHEN PERFORMING ANY ADJUSTMENT OR MAINTENANCE, YOU MUST FIRST SHUT OFF THE ENGINE, WAIT FIVE (5) MINUTES TO ALLOW PARTS TO COOL AND DISCONNECT THE SPARK PLUG WIRE(S), KEEPING IT AWAY FROM THE SPARK PLUG(S).
NOTE: Please refer to the Engine Owner's Manual for
•Change the Engine oil and Oil Filter.
•Remove the Spark Plug(s) and pour about 1 ounce of motor oil into the Cylinder hole. Replace the Plug(s) and crank the Engine over a couple of times using the Electric Starter. This will coat the pistons and seat the valves to prevent moisture buildup.
•Clean/replace the Air Filter(s).
•Clean dirt and debris from the Cylinder Head Cooling Fins, Blower Housing, Debris Screen, and Muffler area of the Engine.
•Replace the Fuel Filter.
•If your
•Remove any wrapped weeds from the Blades Carrier Housing. Clean grass and debris from the top and underneath the mower Deck with a stiff brush.
•Check the Blades for nicks and wear. Remove the Blades and sharpen them, or have them professionally sharpened if needed.
•
•Be sure all nuts, bolts, and screws are securely fastened.
•Inspect moving parts and the Blades’ Drive Belt for damage and wear; replace if necessary.
•Store the Battery in a dry area that will not freeze. If you will not use the machine over a long period, charge the Battery every four to six weeks. See page 33.
•If possible, store your
•After the
CALL | 35 |