Briggs & Stratton FIELD and BRUSH MOWER manual Replacing the Wheels

Models: FIELD and BRUSH MOWER

1 56
Download 56 pages 10.8 Kb
Page 36
Image 36
Replacing the Wheels

Replacing the Wheels

WHEN PERFORMING ANY ADJUSTMENT OR MAINTENANCE, YOU MUST FIRST SHUT OFF THE ENGINE, WAIT FIVE (5) MINUTES TO ALLOW PARTS TO COOL AND DISCONNECT THE SPARK PLUG WIRE(S), KEEPING IT AWAY FROM THE SPARK PLUG(S).

Tool Needed:

9/16" Wrench or Socket

Wheel – Part Number 222321

1.With the weight of the machine on the wheel, loosen (counterclockwise) the Axle Bolt (Figure 25) with a 9/16" Wrench or Socket.

2.Block the machine up off the ground so that the Wheel you are removing spins freely, remove the Axle Bolt, Lock Washer, Flat Washer, and Outer Bushing.

3.Slide the Wheel from the Axle.

NOTE: If the Inner Bushing should slip out when removing the Wheel, simply re-insert it on the Step & Mow™ Axle Shaft.

4. Replace the Wheel and hardware in the reverse order.

Inner Bushing Manual background

Manual background Outer Bushing

Manual background Flat Washer

Manual background Lock Washer

Manual background Axle Bolt

Figure 25

32 TOW-BEHIND DR® FIELD and BRUSH MOWER

Page 36
Image 36
Briggs & Stratton FIELD and BRUSH MOWER manual Replacing the Wheels