Care and Maintenance

Cover Removal

WARNING! Do not take apart or attempt to take apart the harness. It is unnecessary and dangerous to do so.

Never remove the buckle tongues from the harness. They cannot be reattached after removal.

1�Remove infant body pillow.

2�Loosen harness by lifting harness adjuster lever while pulling shoulder straps forward as far as possible.

3�Unhook shoulder straps from yoke on rear of child restraint.

4�Pull upper harness straps through head pad and cover to front of restraint.

5�Remove buckle and belly pad (pg. 35).

6�Gently remove head pad cover. Be careful not to damage the energy-absorbing foam.

7�Remove upper portion of cover.

8�Pull lower harness straps, buckle tongues, HUGS™ pads, and chest clip through lower slots in cover.

9�Remove entire cover from restraint.

Refitting the Cover

To refit the cover, reverse above directions. Make sure that the shoulder straps are threaded through the chest clips and that the harness is not twisted.

33

Page 35
Image 35
Britax Boulevard manual Care and Maintenance, Cover Removal, Refitting the Cover