Care and Maintenance
Refitting the Cover
To refit the cover, reverse the previous directions. Make sure the harness straps are properly threaded through the chest clips and the harness is not twisted.
Cleaning the Cover
•HAND WASH using cold water and mild soap.
•LINE or
•DO NOT bleach, machine wash, machine dry or iron.
Cleaning the Shell
•SPONGE CLEAN using warm water and mild soap.
•TOWEL DRY
•DO NOT use solvents, abrasive cleaners or disassemble the harness.
Cleaning the Harness
•SPONGE CLEAN using warm water and mild soap.
•TOWEL DRY
•DO NOT bleach, machine wash, machine dry or disassemble the harness.
Care and Maintenance
Harness Buckle Removal
1 Fully recline the child seat.
2Locate the metal buckle strap retainer on the bottom of the child seat.
3 Pull the retainer away from the child seat to loosen.
4Turn the retainer so the short side will A go through the slot in the child seat shell (Fig. A).
5Push the retainer through the slots in the shell and cover to the top of the child seat.
Re-threading the Harness Buckle
1Locate the slot in the cover and shell for the harness buckle.
2Turn the metal buckle strap retainer so the short side will go through the slot in the cover and the child seat shell (Fig A).
3Push the retainer through the slots in the shell and cover, to the bottom of the child seat.
4Pull the harness buckle away from the child seat until tight and verify the harness buckle strap is not twisted and the release button is facing outward.
34 | 35 |
