Installation:
Rear
Facing
7 With one hand, push the child restraint firmly into the vehicle seat while pulling the first LATCH con- nector strap tight (fig D).
8 Continue pressing child restraint firmly into the vehicle seat while pulling the second LATCH connector strap tight.
9 Verify that all connections are tight and the child restraint is secure.
D
10 If desired, attach
Important
•Always store LATCH connectors when not in use by attaching to storage rings on the side of the child restraint.
•Rear facing installation is improved by the use of the Versa- Tether™, but it is not required.
•If you have a problem stabilizing your child restraint, place a rolled towel in the crease of the seat to help level the child restraint base.
Warning
•DO NOT raise the base beyond horizontal or off of the vehicle seat, doing so will reduce the protection for your child.
Removal
•To remove the child restraint, release both LATCH connectors from the LATCH anchors by pressing the red button.
•If connected, disconnect the
•Always store LATCH connectors when not in use by attaching to storage rings on the side of the child restraint.
12
