Britax LATCHANCHOR manual Vehicle Safety Belts, Important Some vehicles have no seating

VehicleSafetyBelts

NOTE: The information in this section only applies if you are installing the child restraint using the vehicle seat belts. If using LATCH, this section should be ignored.

IMPORTANT: Some vehicles have no seating

positions which are compatible with this child restraint, or any other child restraint. If in

doubt contact your vehicle manufacturer for assistance.

The following types of vehicle seat belts are not compatible with this child restraint:

Front seat belts with top or bottom anchorage points in the door.

Motor driven automatic seat belts.

Three-point belts that have separate

retractors for the shoulder section and the lap section.

Non-locking (ELR) two-point seat belts.

The owner's manual for your vehicle will have information on the types of seat belts

in your vehicle. If you have belts of the above-listed types, select anoth- er seating position. This child restraint will work with rear seat three- point seat belts with a sliding latch plate, and with rear seat three-point seat belts that are specifically marked as appropriate for child restraints. The middle rear seat of most vehicles has a lap belt which most often will work.

This child restraint can fit securely in most vehicles using the existing seat belts. However, some types of vehicle designs prevent a secure fit of the child restraint due to the position of the seat belt lower anchorage points.

8