Britax LATCHANCHOR manual Forward Facing Lap Belt Installation

Installation:ForwardFacing

A

B

Forward Facing Lap Belt

Installation

Figure A illustrates a typical lap belt only seat belt system.

1 Place the child restraint forward facing on the vehicle seat.

2 If stabilizing bar is extended press blue release button, located adjacent to the right side rear facing lock-off, to release and store bar. (fig. B).

3 Pass the seat belt through both side slots, then fasten the seat belt and verify that it is not twisted (fig. C).

4 Before continuing, make sure that the lap belt passes under BOTH lap belt posi- tioning guides (fig. D).

NOTE: Forward facing installation is improved by the use of the Versa-Tether™, but is not required.

C	D
22