Britax LATCHANCHOR manual Click is heard fig. E

Installation:RearFacing

7 Reattach hook and loop attach- ments on the front edge of the cover.

8 Press child restraint into vehicle seat, while removing slack from the lap portion, then the shoulder portion of the seat belt (fig. D).

9 Maintain pressure on child restraint, then position both sec- D tions of seat belt through the lock-off.

10Close lock-off arm. Lock-off is properly closed when a positive

click is heard (fig. E).

NOTE: It is only necessary to use

one lock-off. Always use the lock- off that is closest to the seat belt

buckle. Never bend the plastic lock-off arm up or down to pre- E vent breakage. Do not route

LATCH Harness through the rear facing lock-offs when installing with vehicle seat belt.

11 If desired, attach Versa-Tether™as instructed on pages 27-28. Rear facing installation is improved by the use of the Versa-Tether™, but it is not required.

12Verify that the seat belt is tight and the child restraint is secure.

Removal

To remove the child restraint, unfasten the seat belt and reverse the above directions.

14