Britax LATCHANCHOR manual Using the Buckle, Using the Chest Clip, Fastening the Buckle

UsingtheBuckle

Fastening the Buckle

1 Hold the buckle with one hand.

2 Use your other hand to insert one tongue at a time into the buckle. Proper connection is confirmed with a positive click after inserting the second buckle tongue.

Releasing the Buckle

1 Brace the rear of the buckle with hand.

2 Use thumb to press release button until tongues are ejected from buckle.

NOTE: Periodically clean the buckle to ensure proper operation. See section Cleaning the Buckle on page 38.

UsingtheChestClip

Open the chest clip by squeezing the middle tabs, then pulling the two pieces apart.

IMPORTANT: The correct height for the chest clip is at the middle of the chest, level to the armpit. Always make sure that the harness is tight before each use or after any adjustments.

30