Britax P321900 manual Using the Versa-Tether

Installation : Versa-Tether

Using the Versa-Tether

1Consult your vehicle owner’s manual for designated tether anchorage locations.

2Locate the tether on the rear of the child seat and remove the tether from the pouch.

3Place the tether up and over the child seat back.

4Install the child seat using the LUAS or the vehicle belts according to the instructions in this manual.

5Tilt the tether release tab then pull the tether strap to fully extend it into a “V” shape.

6Locate the hook on the strap and loosely attach the tether to the vehicle’s designated tether anchor.

•See figure A for a forward-facing installation.

•See figures B and C for a rear-facing installation.

7Pull the tether adjuster strap to remove all slack. Roll up any excess webbing and store in tether pouch.

8Verify there is tension in the tether strap and that the child seat is properly secured.

•The child seat is secure when it cannot be moved front-to-back or side-to-side more than 2.5 cm (1 in.) at the belt path.

OR

A

OR

b

C

26