Britax P321900 manual Cover Removal, Yoke on the rear of the child seat Fig. E

Care and Maintenance

Cover Removal

WARNING! Do not take apart the harness. Never remove the buckle tongues from the harness. They cannot be reattached after removal. If reassembled incorrectly, the child seat may not perform as

intended.

1Remove the infant body pillow.

2Loosen the harness by lifting the harness adjuster

	lever while pulling both shoulder straps forward
	as far as possible.
3	Unhook the shoulder straps from the harness
	yoke on the rear of the child seat (Fig. E).	e
4	Pull the upper harness straps through the head
	restraint and cover to the front of the child seat.

5Remove the buckle and belly pad. See page 35.

6Remove the head restraint portion of the cover. Be careful not to damage the energy-absorbing foam.

7Remove the energy-absorbing foam from the head restraint and set aside.

8Gently remove the upper portion of the cover by pulling it around the head restraint to the front.

9Pull the lower harness straps, buckle tongues, HUGS™ chest pads, and chest clip through the lower slots in cover.

10Remove the entire cover from the child seat.

33