Britax P321900 Switching the Lower Connector System LCS, Verify that the harness is not twisted

Child Seat Functions

Switching the Lower Connector System (LCS)

The LCS strap may need to be switched to the proper belt path in rear-facing (Fig. A) versus forward- facing (Fig. B) installations. If a proper connection of the LCS connectors to the LUAS anchors cannot be achieved, complete the following procedure to switch the connectors.

1Lift the front of the child seat cover to access the LCS connectors.

2Pass the LCS connector strap through the belt path on the child’s right side (Fig. C).

3Pass one LCS connector through the appropriate belt path ensuring that the larger part of the connector is on top for the installation procedure you wish to use (Fig D).

•Verify that the harness is not twisted.

•When installing this child seat in rear-facing mode, the LCS strap must rest behind the child seat buckle strap.

NOTE: To ensure LCS connector is properly aligned with vehicle’s LUAS anchor, the connector’s red release button should face away from vehicle seat back, and the larger of the two connector sections is on top (Fig. D).

4 Replace the cover and continue with the installation procedure.

A

b

C

Release Top Button

D

28