INSTALL DUCT COLLAR
1.Fix the discharge collar onto the hood; it must be fixed either by means of 4 mounting screws (3,9x9,5mm).
MOUNTING SCREWS
(3.9x9.5mm)
DISCHARGE COLLAR
MOUNT HOOD TO SUPPORT FRAME
1.Before mount hood to support frame remove the electrical box.
2.Mount hood to support frame.
3.Insert four (4) bolts through the top of the hood - from the inside.
4.Use four (4) nuts and 4 washers (D.6.4mm) to secure hood to support frame as shown.
5.Replace electrical box.
NUT
WASHER
(D. 6.4MM)
BOLT
- 8 -
