5.6 OPERATINGC34 / CMR CONTROL5.6.1 C34 / CMR CONTROL DESCRIPTION
5.6.2 USING C34 / CMR CONTROL
• OFF:To stop the unit, slide the button on this position.
• NORMAL:For a day-to-day usage, slide the button on this position. The
unit then will operate on normal speed.
• BOOST:For a high speed operation, slide the button on this position.
Generally used when extreme conditions occur, eg.:parties,
smokers, etc.
• RECIRCULATION: For a normal speed operation, without exchanging air with
the outside, slide the button on this position.This mode is
recommended in high humidity days (rain, heat wave).
Also, use it when the outside temperature is extremely cold
and/or the inside air is too dry.It can be used also to recirculate
the heat coming from a wood stove throughout the house,
or the fresh air from a cooling system.
5. CONTROLS (CONT’D)
VC0048 NORMAL INDICATOR:
LIGHTS UP WHEN SLIDE
SWITCH IS ON NORMAL
POSITION.UNITIS OPERATING
ON NORMAL SPEED.
FRESH AIR INDICATOR:
LIGHTS UP WHEN SLIDE
SWITCH IS ON NORMAL
OR BOOST POSITION.
FILTERMAINTENANCE
INDICATOR:
FLASHESWHEN IT IS TIME
TOREPLACE PREFILTER
ANDWASH CORE FILTERS.
SEE BIANNUAL
MAINTENANCE IN
SECTION 6.
LIGHTS UP WHEN IT IS
TIMETO REPLACE FILTER
AND PREFILTERAND
CLEAN CORE AND CORE
FILTERS.SEE ANNUAL
MAINTENANCE IN
SECTION 6.
RESET FILTERHOLE:
ONCE THE MAINTENANCE DONE, RESET THE FILTER
MAINTENANCE INDICATOR BY CAREFULLYINSERTING
ASMALL ROD (EG:PAPER CLIP) IN THE RESET FILTER
HOLE, DURING 1 SECOND.THEFILTER MAINTENANCE
INDICATORWILL TURN OFF
.
BOOST INDICATOR:
LIGHTS UP WHEN SLIDE
SWITCH IS ON BOOST
POSITION.UNITIS OPERATING
ON HIGH SPEED.
RECIRCULATIONINDICATOR:
LIGHTS UP WHEN SLIDE
SWITCH IS ON
RECIRCULATION.UNIT IS
OPERATINGON NORMAL
SPEED.
- 33 -