4.INSTALL THE UNIT (CONT’D)
4.7INSTALLING DUAL EXTERIOR HOOD
(HEPA 2000, HF 2.0, HEPA 3000, HF 3.0 AND HEPA 4000 UNITS ONLY) (CONT’D)
4.7.3CONNECTING TANDEM® TRANSITION TO EXTERIOR DUAL HOOD (CONT’D)
2.Joint the end of the Tandem® transition to the rear of the exterior backplate. Secure with 2 Xmas tree pins and seal properly with duct tape.
Xmas tree pin |
VD0085 |
CAUTION
The exterior backplate must be installed with the word ‘’TOP’’ pointing upward.
3.Lean the exterior backplate to the exterior wall.Using 4 #8 x 1 1/2”screws, fix it to the wall. Seal the outline with caulking.
VD0086 |
4.Snap the assembled exterior hood on its backplate and secure with 2 provided screws (#8 x 3/4” long).
VD0087 | screw |
- 26 -
