Broilmaster Q3XN-1 owner manual Operation, Before Cooking, Preheating, Electrical Accessories

OPERATION

Before Cooking

Before cooking on a grill for the first time, burn off any manufacturing process oil residue.

1.Raise the grill lid.

2.Light grill burner.

3.Burn on HI for ten minutes.

4.Close the lid and burn on HI for an additional ten minutes.

5.The grill is now ready for use.

Preheating

Before cooking on a gas grill, allow the grill to preheat on HI for 15 minutes with the lid closed.

This uses very little fuel and provides better flavor.

Electrical Accessories

If an electrical accessory is used on your grill, the accessory must be electrically grounded in accordance with local codes or, in the absence of local codes, with the National Electric Code, ANSI/NFPA 70. In Canada, the electrical accessory must be electrically grounded in accordance with the ap- plicable section of the current Canadian Electrical Code, CSA C22.1.

Any electrical accessory should be equipped with a three- prong (grounding) plug, and plugged into a properly grounded three-prong receptacle or wall outlet. Do not cut or remove the grounding prong from the plug.

If an extension cord is required, use only a three-prong cord and plug into a properly grounded receptacle as described above.

Do not expose an electrical accessory to water. Avoid using any electrical accessory in wet weather as it may present a shock hazard.

Keep any electrical cord and fuel supply hose away from all heated surfaces.

B101748-1-0512 Page 21