STITCH LENGTH
The stitch length is regulated by turning the stitch length dial.
Numerals on the dial represent the stitch length.
THE HIGHER THE NUMBER, THE LONGER THE STITCH.
To increase the stitch length, turn stitch length dial
To decrease the stitch length, turn dial clockwise to smaller on the dial.
NOTE:
1.The “0” on the dial means that the material is not being fed.
2.Always set at 4 when you sew triple stretch stitch (See page21).
ZIGZAG WIDTH
The zigzag width is regulated by operating the zigzag width lever.
Numerals above the lever represent the width of stitch.
THE HIGHER THE NUMBER, THE WIDER THE STITCH.
The “0” means straight stitch only.
NOTE: | Do not move the lever while |
| the needle is in the material. |
