![HOW TO FINISH YOUR SEWING PROJECT (REVERSE STITCHING)](/images/new-backgrounds/179986/17998639x1.webp)
HOW TO FINISH YOUR SEWING PROJECT (REVERSE STITCHING)
Reverse stitching is used to reinforce stitches near the edge of material or wherever reinforcement is needed.
1.That is done by stitching to the material edge… then stopping.
2.Push Reverse Sewing Button and stitch backwards for ½ inch (10mm) from material edge.
HOW TO REMOVE FINAL SEWING FROM MACHINE
1.Stop the machine.
2.Raise needle to its highest position and make sure that the thread
3.Lift presser foot and pull out the material gently to the left side diagonally.
4.Cut both threads on the thread cutter.
5.Leave 4 inches (10cm) of thread between the presser foot loose while the thread
HOW TO GUIDE AND SUPPORT MATERIAL
Generally it is enough to guide the material in front of the presser foot as shown in the upper illustration.
However, in case of special materials such as tricot, crepes, knits, etc., we recommend you to support the material both in front and back of the presser foot with gentle tension as shown in the lower illustration.