EMBROIDERING, USING EMBROIDERY HOOP
SET YOUR SEWING MACHINE AS PER FOLLOWING TABLE.
1.Remove presser foot.
2.Draw design on the material.
3.Use embroidery hoop as you would for monogramming.
4.Position the hoop under the needle and lower presser bar.
5.Pull lower thread up through material.
6.Stitch outline of design by removing embroidery hoop accordingly.
7.To fill in design stitch from outline of design to inside and from inside to edge of outline alternately until design is completely filled in. Keep stitching close together.
NOTE:A long stitch is made by removing embroidery hoop rapidly and a short stitch is made by moving it slowly.
