NARROW HEMMING
By using narrow hemmer foot a neat scroll type hem is made.
SET YOUR SEWING MACHINE AS PER FOLLOWING TABLE.
1. Cut top corner of the material about 0.3cm (1/8”).
2. Place material wrong side up and insert cut off angel into foot opening.
3. Pull material by hand from the back of the presser foot.
Make sure the needle is positioned over material.
Lower presser foot.
4. Make sure upper and lower threads are placed behind presser foot.
5. Sew at medium speed. Guide the material by hand through the presser foot opening.
NOTE:With zigzag width lever set a 3, zigzag narrow hemming can be done following the above procedure.
