10 - 1 MAKING COPIES
10

Using the MFC as a copier

You can use your MFC as a copier, maki ng up to 99 copies at a time.

Enter Copy mode

Before making copies, make sure that (Copy) is illuminated
in green. If it is not, press (Copy) to enter Copy mode. Th e
default setting is Fax. Yo u can change the number of seconds or
minutes that the MFC stay s in Copy mode after a copy operatio n.
(See Setting the Mode Timer on page 4-5.)
The printable area of your M FC begins at approximately 0.17 in.
(4.32 mm) from both sides and 0.12 in. (3 mm) from the top or bottom
of the paper.
Making copies
While the MFC is copying, incoming faxes will be received into
the memory instead of being printed.
Unprintable
area
0.12" (3 mm)
0.17" (4.32 mm)
Ex: Letter (Original) Letter (Paper)