AUTO DIAL NUMBERS AND DIALING OPTIONS 7 - 2
3
Press or to select
Fax/Tel (or E-Address).
Press Set.
4
Enter the phone or fax numb er (up to 20 digits).
Press Set.
—OR—
If you purchased the optional NC-9100h, you can select
E-Address in Step 3 and then press Set.
■If you want to enter a pause in th e dialing sequence (fo r example,
to access an outside line), pr ess Redial/Pause as you are
entering the digits.
Each key press of Redial/Pause enters a 3.5 second pause
when the number is dialed, disp layed by a dash on the screen.
5
Use the dial pad to enter the name (up to 15 characters).
Press Set.
(You can use the chart on page 4-3 to help you enter letters.)
—OR—
Press Set to store the number without a name.
6
Go to Step 2 to store another On e-Touch number.
—OR—
Press Stop/Exit.
When you dial an auto dial number, the LCD shows the name
and number you have stored, or, if you have not stored a name,
only the number you have store d.
One-Touch Dial
Fax/Tel