Upper threading | Brother 855-X06 specs

KNOWING YOUR SEWING MACHINE—————

Note

●If the thread is not correctly inserted through the tension-adjusting spring of the bobbin case, it may cause incorrect thread tension.

1

1Tension-adjusting spring

3Replace the bobbin cover. Put the projection into the race retainer groove and push closed.

12

1Groove

2 Projection

•Start sewing after threading the lower and upper thread. When sewing gathers or darts, you can draw up the lower thread by hand so that some thread will be left over. Refer to the steps in “Drawing up the lower thread” (page 21).

Upper threading

2	2	1
2
	3	5
	4

1Spool pin

2Thread guide (back)

3 Thread guide (front)

4 Thread take-up lever

5 Mark on the handwheel

CAUTION

●When threading the upper thread, carefully follow the instructions. If the upper threading is not correct, the thread may become tangled or the needle may bend or break.

●Never use a thread weight of 20 or lower.

●Use the needle and the thread in the correct combination. For details on the correct combination of needles and threads, refer to “FABRIC, THREAD, AND NEEDLE COMBINATIONS” on page 22.

17

Image 18

Brother 855-X06 operation manual Upper threading

Contents

Sewing Machine Important Safety Instructions Save These Instructions Contents Knowing Your Sewing Machine AccessoriesOptional accessories Part Name Part Code Americas Others Main Parts Flat bed attachment Using Your Sewing Machine Connecting plugsConnect the foot controller plug to the machine Checking the needle Main power and sewing light switchFoot controller Replacing the needle Changing the presser foot Pattern selection dial Presser foot installation orientationControls Stretch stitching Stitches Patterns and stitch namesStitches Only available on certain models Pattern Stitch Name Recommended 0-3/16 Fixed Stitch length dial Stitch width dial Threading the Machine Reverse sewing leverWinding the bobbin Pull up the spool pin and put a spool of thread on this pin Turn on the machine Install the bobbin wound with thread Lower threading Lower threading for models equipped with a quick-set bobbin Groove Projection Upper threading Turn off the machine Raise the presser foot lever Guide Needle holder Needle threader lever Pull the thread through the needle For models equipped with a quick-set bobbin Drawing up the lower threadPull on the upper thread to draw up the lower thread Replace the bobbin cover Transparent nylon thread FABRIC, THREAD, and Needle CombinationsBall point needle Fabric Type/Application Thread Size of Needle Sewing Basics Please read before sewingStarting sewing Trial sewing Changing the sewing DirectionSewing thick fabrics Stitching cylindrical pieces Sewing thin fabricsSewing stretch fabrics Sewing with a twin needle Option Thread the left needle Attaching the extra spool pinSelect a stitch Thread the right needle Correct tension Thread tensionUpper tension is too loose Upper tension is too tight Zigzag stitching BUILT-IN StitchesStraight stitching Blind hem stitching Fold the fabric along the desired edge of the hem, and press Adjust the thread tension so that it is tighter than normal Elastic stitchingSew at a slow speed Joining fabric Double action stitchingFagoting Set the stitch width to Overedge stitching Pattern StitchStitch Decorative stitching Feather stitchingTriple zigzag stretch stitching Stitch Name Pattern Making a buttonhole Sewing Buttonholes and ButtonsMaking a buttonhole 1-step automatic buttonhole Openbutton.the button plate and insert If the button does not fit in the button guide plate You need to sew the front bar tack firstLower the buttonhole lever and push it back slightly Follow steps 1 to 6 from Making a buttonhole on Adjusting buttonholesMaking a buttonhole on stretch fabrics Piece of fabric to observe how Material is fed Then tie it with the bobbin thread Sewing buttonsAt a slow speed, sew about 10 stitches Any Sewing Darning Zipper insertion Using Attachments and ApplicationsWhen you have finished sewing, remove the basting stitching Prepare the fabric with the zipper basted on the wrong side Appliqués GatheringDarning Baste the cut design to the fabric When edge stitching Turn off the machine Optional AccessoriesUsing the blind stitch foot When sewing seams Turn off the machine Cleaning MaintenancePrecautions on storing the machine Appendix Install the needle plate, and then tighten the screws Troubleshooting Symptom Possible cause How to put it right Thread is Thread BreaksLower Tangled or Not be used Stitches are SkippedThreader can Stitch is Index Numerics English