Knowing Your Sewing Machine, Accessories | Brother 855-X06 manual

———————

1 KNOWING YOUR SEWING MACHINE
				1
ACCESSORIES
We have designed these accessories to help you easily perform most sewing tasks.
1.	2.	3.	4.	5.
6.	7.	8.	9.

	No.	Part Name	Part Code
			Americas	Others
	1	Zigzag foot “J”	XC4901-021
	1	(on machine)	XC4901-021
		(on machine)
	2	Buttonhole foot “A”	XD1792-031
	3	Zipper foot “I”	XE9369-001
	4	Darning Plate	XC6063-021
	5	Button sewing foot “M”	XE2137-001

	No.	Part Name	Part Code
			Americas	Others
	6	Bobbin	SA156	SFB:
	6	(One is on machine)	SA156	XA5539-151
		(One is on machine)		XA5539-151
	7	Needle set	3-piece set:	XE5328-001
	7	(90/14 needle)	2-piece set: XE7064-001
		(90/14 needle)	2-piece set: XE7064-001
	8	Oval screwdriver	XE5241-001
	9	Foot controller	See page 5

Note

●The included accessories vary depending on the machine model.

Optional accessories

The following are available as optional accessories to be purchased separately. Depending on the model you purchased, the following accessory may be included with your machine.

1.

2.

3.

4.

5.

6.7.8.

	No.	Part Name	Part Code
			Americas	Others
	1	Extra spool pin	XE2241-001
	2	Twin needle	X57521-021
	2	(2.0/75 needle)	X57521-021
		(2.0/75 needle)
	3	Walking Foot	SA107	F034N:
	3	Walking Foot	SA107	XC2165-002
				XC2165-002
	4	Quilting Foot	SA129	F005N:
	4	Quilting Foot	SA129	XC1948-002
				XC1948-002

	No.	Part Name	Part Code
			Americas	Others
	5	1/4-inch Quilting Foot	SA125	F001N:
				XC1944-052

	6	Narrow Hemmer Foot	SA127	F003N:
				XC1945-002

	7	Blind Stitch Foot	SA134	F018N:
				XC1976-052

	8	Quilting guide	SA132	F016N:
				XC2215-002

4

Image 5

Brother 855-X06 Knowing Your Sewing Machine, Accessories, Optional accessories, Part Name Part Code Americas Others

Contents

Sewing Machine Important Safety Instructions Save These Instructions Contents Optional accessories AccessoriesKnowing Your Sewing Machine Part Name Part Code Americas Others Flat bed attachment Main Parts Connect the foot controller plug to the machine Using Your Sewing MachineConnecting plugs Foot controller Main power and sewing light switchChecking the needle Replacing the needle Changing the presser foot Controls Presser foot installation orientationPattern selection dial Stretch stitching Stitches Only available on certain models Patterns and stitch namesStitches Pattern Stitch Name Recommended 0-3/16 Fixed Stitch width dial Stitch length dial Winding the bobbin Threading the MachineReverse sewing lever Turn on the machine Pull up the spool pin and put a spool of thread on this pin Lower threading Install the bobbin wound with thread Groove Projection Lower threading for models equipped with a quick-set bobbin Upper threading Guide Turn off the machine Raise the presser foot lever Needle holder Needle threader lever Pull the thread through the needle Pull on the upper thread to draw up the lower thread Drawing up the lower threadFor models equipped with a quick-set bobbin Replace the bobbin cover Ball point needle FABRIC, THREAD, and Needle CombinationsTransparent nylon thread Fabric Type/Application Thread Size of Needle Starting sewing Sewing BasicsPlease read before sewing Sewing thick fabrics Trial sewingChanging the sewing Direction Sewing stretch fabrics Sewing thin fabricsStitching cylindrical pieces Sewing with a twin needle Option Select a stitch Attaching the extra spool pinThread the left needle Thread the right needle Upper tension is too loose Thread tensionCorrect tension Upper tension is too tight Straight stitching BUILT-IN StitchesZigzag stitching Blind hem stitching Fold the fabric along the desired edge of the hem, and press Sew at a slow speed Adjust the thread tension so that it is tighter than normalElastic stitching Fagoting Double action stitchingJoining fabric Set the stitch width to Stitch Overedge stitchingPattern Stitch Triple zigzag stretch stitching Feather stitchingDecorative stitching Stitch Name Pattern Making a buttonhole 1-step automatic buttonhole Sewing Buttonholes and ButtonsMaking a buttonhole Openbutton.the button plate and insert Lower the buttonhole lever and push it back slightly If the button does not fit in the button guide plateYou need to sew the front bar tack first Making a buttonhole on stretch fabrics Adjusting buttonholesFollow steps 1 to 6 from Making a buttonhole on Piece of fabric to observe how Material is fed At a slow speed, sew about 10 stitches Sewing buttonsThen tie it with the bobbin thread Any Sewing Darning When you have finished sewing, remove the basting stitching Using Attachments and ApplicationsZipper insertion Prepare the fabric with the zipper basted on the wrong side Darning GatheringAppliqués Baste the cut design to the fabric Using the blind stitch foot Optional AccessoriesWhen edge stitching Turn off the machine When sewing seams Turn off the machine Precautions on storing the machine MaintenanceCleaning Appendix Install the needle plate, and then tighten the screws Symptom Possible cause How to put it right Troubleshooting Lower Thread BreaksThread is Tangled or Threader can Stitches are SkippedNot be used Stitch is Numerics Index English