Brother 885-V67 operation manual List of symptoms, 101

——————————————————————————————————————————————————————————————————————————————————————————————————————————————————————

List of symptoms

■ Before sewing

Symptom	Possible cause	How to put it right	Reference
		Raise the needle either by turning the
The needle		handwheel toward you
threader can not	You have not moved the needle	(counterclockwise) so that the mark	page 23
be used. (For	holder to its highest position.	on the wheel points up or by pressing
models equipped
with the needle		(needle position button) once or
		twice.
threader lever.)
	The needle is incorrectly installed.	Correctly install the needle.	page 30
The sewing light	The machine is not turned on.	Turn on the machine.	page 12
does not come on.
	The thread is not passed through the	Correctly pass the thread through the
	bobbin-winding thread guide		page 17
		bobbin-winding thread guide.
	correctly.
Bobbin thread	Bobbin spins slowly. (for models	Move the sewing speed controller to
does not wind	equipped with the sewing speed	the right (so that the speed will be	page 19
neatly on the bob-	controller.)	fast).
bin.
	The thread that was pulled out was	Wind the thread that was pulled off
	not wound onto the bobbin correctly.		page 18
	(For models equipped with the fast	round the bobbin five or six times
		clockwise.
	bobbin winding system.)
The thread does		Raise the needle either by turning the
		handwheel toward you
not pass through
	You have not moved the needle	(counterclockwise) so that the mark
the eye of the nee-			page 23
dle. (For models	holder to its highest position.	on the wheel points up or by pressing
equipped with the		(needle position button) once or
needle threader		twice.
lever.)
	The needle is incorrectly installed.	Correctly install the needle.	page 30
The needle
threader lever
does not lower to	The needle has not been raised to the
the correct		Press the needle position button.	page 23
position. (For	correct position.
models equipped
with the needle
threader lever.)
While winding the
bobbin, the	You have not wound the bobbin	After removing the thread wound
bobbin thread was		below the bobbin winder seat, wind	page 15
wound below the	thread properly.
		the bobbin correctly.
bobbin winder
seat.

4

101