Brother 885-V67 operation manual Remove the spool cap, GSlide the spool cap onto the spool pin

KNOWING YOUR SEWING MACHINE —————————————————————————————————————————————————————————————————————————————————

dAs shown, press down on the spool pin lever with your finger.

XThe spool pin swings up.

CAUTION

●Do not grab the bar to raise the spool pin, otherwise, the spool pin may bend or break.

eRemove the spool cap.

aSpool pin

bSpool cap

CAUTION

●Be sure to raise the spool pin before use. If the spool of thread is in the wrong place, or is set incorrectly, the thread may tangle on the spool pin and cause the needle to break.

fFully insert the spool for the upper thread onto the spool pin.

Slide the spool onto the pin so that the spool is horizontal and the thread unwinds to the front at the bottom.

gSlide the spool cap onto the spool pin.

With the slightly rounded side of the spool cap positioned toward the left, slide the spool cap onto the spool pin as far as possible to the right so that the spool is moved to the right end of the spool pin.

CAUTION

●If the spool or the spool cap is not positioned correctly, the thread may become tangled around the spool pin or the needle may break.

●Three spool cap sizes are available, allowing you to choose a spool cap that best fits the size of spool being used. If the spool cap is too small for the spool being used, the thread may catch on the slit in the spool or the needle may break.

24