Brother 885-V67 operation manual Threading the Machine, Winding the bobbin, Spool pin swings up

——————————————————————————————————————————————————————————————————————————————————————————————————————————————————————

THREADING THE MACHINE

Winding the bobbin 1

This section describes how to wind the thread onto the bobbin.

• For details on the fast bobbin winding, see page 18.

a Bobbin-winding thread guide

b Bobbin winder shaft c Bobbin

CAUTION

●Only use bobbins (part code: SA156, SFB: XA5539-151) that have been designed for this sewing machine. Using other bobbins may cause damage to the machine.

●We designed the bobbin that comes with this machine. If you use bobbins from other models, the machine will not work properly. Only use the bobbin that comes with this machine or bobbins of the same type (part code: SA156, SFB: XA5539-151).

Actual size

11.5mm (7/16 inch)

This model Other models

aAs shown, press down on the spool pin lever with your finger.

X The spool pin swings up.

CAUTION

●Do not grab the bar to raise the spool pin, otherwise, the spool pin may bend or break.

bRemove the spool cap.

aSpool pin

bSpool cap

CAUTION

●Be sure to raise the spool pin when winding the bobbin. The thread may become tangled if the bobbin winder is used without raising the spool pin.

15