Brother 885-V67 operation manual After sewing for about 10 seconds at low

UTILITY STITCHES ———————————————————————————————————————————————————————————————————————————————————————————————————

hTurn the handwheel toward you (counterclockwise) to check that the needle correctly goes into the two holes of the button.

Adjust the stitch width to the distance between the button holes.

CAUTION

●When sewing, be sure that the needle does not touch the button, otherwise the needle may bend or break.

iStart sewing.

•After sewing for about 10 seconds at low

speed, press (reverse/reinforcement stitch button) to sew reinforcement stitches.

jPull the upper thread at the end of the stitching to the wrong side of the fabric, and then tie it with the bobbin thread.

Use scissors to cut the upper thread and the bobbin thread at the beginning of the stitching.

kWhen you are finished attaching the button,

slide the feed dog position lever to (to the left as seen from the front of the machine) and turn the handwheel to raise the dogs.

•Normally, the feed dog position lever is

positioned at .

56