Brother 885-V67 operation manual Fagoting, For details, refer to Selecting a stitch

——————————————————————————————————————————————————————————————————————————————————————————————————————————————————————

Stitch Name

Decorative stitch

Pattern Presser Foot

N

N

N

		Stitch Width	Stitch Length
		[mm (inch.)]	[mm (inch.)]
Pattern	Application
No.		Auto	Auto
		Manual	Manual
	Decorative hemming on thin,	5.0 (3/16)	2.0 (1/16)
31	medium weight and plain weave	1.5-7.0	1.5-4.0
	fabrics, heirloom stitching, etc.	(1/16-1/4)	(1/16-3/16)
32	Decorative stitching, smocking	6.0 (15/64)	1.6 (1/16)
		1.5-7.0	1.0-4.0
	stitching, heirloom stitching, etc.
		(1/16-1/4)	(1/16-3/16)
33	Decorative stitching, smocking	5.0 (3/16)	1.6 (1/16)
		1.5-7.0	1.0-4.0
	stitching, heirloom stitching, etc.
		(1/16-1/4)	(1/16-3/16)

Twin Needle	Walking Foot	Reverse (Rev.)/ Reinforcement (Rfc.) Stitching
No	No	Rfc.
No	No	Rfc.
No	No	Rfc.

CAUTION

3

●Be sure to turn off the main power before replacing the presser foot. Otherwise, injuries may occur if the foot controller or (start/stop button) is accidentally pressed and the machine starts sewing.

Fagoting

Stitching across an open seam is called “fagoting”. It is used on blouses and children's clothing. This stitch is more decorative when thicker thread is used.

aUse an iron to fold the two pieces of fabric along their seams.

bBaste the two pieces of fabric, separated by about 4.0 mm (3/16 inch), onto thin paper or a sheet of water-soluble stabilizer.

•If you draw a line down the middle of the thin paper or water-soluble stabilizer, sewing is easier.

3

1

2

aThin paper or water soluble stabilizer

bBasting stitching

c4 mm (3/16 inch)

cAttach zigzag foot “J”.

dSelect stitch or .

eSet the stitch width to 7.0 mm (1/4 inch).

•For details, refer to “Selecting a stitch” (page 37).

fSew with the center of the presser foot aligned along the center of the two pieces of fabric.

gAfter sewing is finished, remove the paper.

69