APPENDIX ——————————————————————————————————————————————————————————————————————————————————————————————————————————

dRaiselever. the presser foot using the presser foot

aPresser foot lever

If the presser foot is not raised, the sewing machine cannot be threaded correctly.

eRaise the needle by turning the handwheel toward you (counterclockwise) so that the mark on the wheel points up, or press (needle position button) (for models equipped with the needle position button) once or twice to raise the needle.

or

aMark

bNeedle position button

fPull some thread off the spool, and then pass the thread under the thread guide.

gPass the thread under the thread guide cover from the back to the front.

Hold the thread with your right hand so that there is no slack in the thread that is pulled out, and then pass the thread under the thread guide cover with your left hand.

aThread guide cover

hFeed the upper thread as shown in the illustration below.

aThread guide

94

Page 96
Image 96
Brother 885-V67 operation manual HFeed the upper thread as shown in the illustration below