Brother 885-X36, 885-X38 1Turn on the machine, Slide the spool cap onto the spool pin, 4Swing up the spool pin, and then remove the spool cap

———————

1Turn on the machine.

2Place the bobbin on the bobbin winder shaft so that the spring on the shaft fits into the notch of the bobbin.

a

b

1Notch

2Spring on the shaft

3Slide the bobbin winder shaft to the right until it snaps into place.4Swing up the spool pin, and then remove the spool cap.

a

b

1Spool pin

2 Spool cap

1

1 Hook of the bobbin-winding thread guide

2 Pre-tension disk

3 Bobbin winder shaft

4 Bobbin

5Fully insert the spool of thread for the bobbin onto the spool pin.

Slide the spool onto the pin so that the spool is horizontal and the thread unwinds to the front at the bottom.

CAUTION

●If the spool is not positioned so that the thread unwinds correctly, the thread may become tangled around the spool pin.

6Slide the spool cap onto the spool pin. With the slightly rounded side of the spool cap positioned toward the left, slide the spool cap onto the spool pin as far as possible to the right so that the spool is moved to the right end of the spool pin.

14