KNOWING YOUR SEWING MACHINE—————

THE MAIN PARTS

5 43

2

 

N

 

 

6

1

 

 

 

F

 

 

 

 

 

 

 

M

7

E

 

L

8

 

G

K

9

O

H

 

 

 

0

C D

I

J

A

B

 

 

 

1Bobbin winder (Page 13)

This winds the thread onto the bobbin for use as the lower thread.

2Stitch length dial (Page 12)

Rotate the dial to control the stitch length.

3Stitch width dial (Page 12)

Rotate the dial to control the stitch width.

4Upper tension-control dial (Page 29)

This controls the tension of the upper thread.

5Bobbin-winding thread guide and pre-tension disc (Page 14, 18)

6Thread take-up lever (Page 20)

7Thread cutter (Page 26)

Pass the threads through the thread cutter to cut them.

8Needle threader (Page 21)

9Quick-set bobbin (Page 16, 22)

0Flat bed attachment with accessory compartment (Page 5) A Presser foot (Page 8)

B Feed dog position switch (Page 13)

CReverse sewing lever (Page 13)

Push this lever to stitch in the reverse direction.

DPattern indication window (Page 9) Shows the stitch number to be performed.

EPattern selection dial (Page 9)

Rotate the dial in either direction to choose the stitch you want.

FHandwheel

Used to manually raise and lower the needle.

GButtonhole fine-adjustment screw (Page 38)

HMain power and sewing light switch (Page 7) You can turn the main power and sewing light switch on and off.

IFoot controller jack / socket (Page 6)

Plug in the foot controller plug and connect the machine to the power supply.

JPresser foot lever (Page 18)

Used to raise and lower the presser foot.

KButtonhole lever (1-Step automatic buttonhole) (Page 36)

Lower the buttonhole lever when sewing buttonholes.

LHandle

Carry the sewing machine by its handle whentransporting the machine.

MThread guide (Page 15, 19)

This is used when winding the thread onto the bobbin and then threading the machine.

NSpool pin and spool cap (Page 14, 19) This holds the spool of thread.

OFoot controller (Page 7)

You can use this to control the sewing speed, and to start and stop sewing.

Foot Controller: Model KD-1902 for 110/120V area Model KD-2902 for 220/240V area

The foot controller part code differs depending on the country or region. Contact your dealer or the nearest authorized service center.

Flat bed attachment

The accessories are stored in the storage space in the flat bed attachment.

1Swing the lid of the flat bed attachment toward you to open the storage space.

1 Flat bed a attachment

b 2 Accessory compartment

XThe bag of accessories is in the storage space.

5