KNOWING YOUR SEWING MACHINE—————

4Swing up the spool pin, and then remove the spool cap.

a

b

1Spool pin

2 Spool cap

5Fully insert the spool for the upper thread onto the spool pin.

Slide the spool onto the pin so that the spool is horizontal and the thread unwinds to the front at the bottom.

CAUTION

●If the spool is not positioned so that the thread unwinds correctly, the thread may become tangled around the spool pin and the thread or needle may break.

●If the spool cap that is used is smaller than the spool, the thread may catch, for example, on the notch in the spool, or the needle may break.

6Slide the spool cap onto the spool pin.

Memo

●When sewing with fine, cross-wound thread, use the small spool cap, and leave a small space between the cap and the spool.

c b

a

1Spool cap (small)

2Spool (cross-wound thread)

3 Space

7While holding the spool with your right hand, pull the thread with your left hand, and then pass the thread under the thread guide A.

1

1Thread guide A

8Pass the thread under the thread guide B from the back to the front.

Hold the thread with your right hand so that there is no slack in the thread that is pulled out, and then pass the thread under the thread guide B with your left hand.

a

1Thread guide B

19