Brother computerized embroidery and sewing machine operation manual Attaching the Embroidery Foot

————————————————————————————————————————————————————

e Loosen the presser foot holder screw and remove the presser foot holder.

Turn the screwdriver toward the back.

d

a c b

aScrewdriver

bPresser foot holder c Presser bar

d Presser foot holder screw

f Hold the embroidery foot "Q" with your right hand, as shown.

Hold the embroidery foot with your index finger wrapped around the lever at the back of the foot.

a

aLever

g While pressing in the lever with your finger, fit the embroidery foot bar over the needle clamp screw to attach the embroidery foot to the presser foot bar.

c

b

a

aPresser bar

bNeedle clamp screw c Embroidery foot bar

h Secure the embroidery foot with the presser foot holder screw.

Set the embroidery foot perpendicular.

a

a Presser foot holder screw

i Tighten the presser foot holder screw. Turn the screwdriver toward the front.

a

4

aScrewdriver

CAUTION

●Do not hit the needle with your finger or the embroidery foot "Q" when attaching it. The needle may break or cause injury.

●Be sure to tighten the screw with the included screwdriver. If the screw is loose, the needle may hit the presser foot and break or bend.

●Before sewing, always turn the handwheel toward you (counterclockwise) slowly to make sure that the needle does not hit the presser foot. The needle may break or bend.

Attaching the Embroidery Foot 139