Brother 885-V95/V96/V97/V98, computerized embroidery and sewing machine operation manual 196

APPENDIX ——————————————————————————————————————————————

No	Error Message	Probable Cause
29		You tried to set a number of characters that will not fit within the frame.
30		The upper thread has become tangled around the bobbin case, and the
		needle is bent and hitting the needle plate, etc., so the sewing machine
		stops (refer to page 188).
31		You tried to use a function that cannot be used when the embroidery
		unit is attached.
		An Embroidery Memory Card that may not compatible with your
		machine has been inserted.
32		• Certain licensed designs cannot be read by this machine.
		• Designs in an unacceptable card format cannot be read by this
		machine.
		• Design data saved in a hoop size not compatible with your machine
		has been selected.
33		The utility stitch key or the reverse/reinforcement stitch button was
		pressed while the embroidery unit is attached.
34		You try to retrieve a pattern downloaded as one for a different machine.
		The start/stop button, the embroidery key, or the memory key is pressed
35		in embroidery mode, but the embroidery unit is not attached.
		The embroidery key was pressed when the embroidery unit is not
		attached.
36		The bobbin winder is winding the bobbin.
37		If error message “F01” through “F07” appears in the LCD while the
	F01-F07	sewing machine is being used, the machine may be malfunctioning.
		Contact your nearest authorized service center.

196