Brother computerized embroidery and sewing machine, 885-V95/V96/V97/V98 Troubleshooting

————————————————————————————————————————————————————

No	Error Message		Probable Cause
19		You changed the stitch pattern settings, and then tried to save them by
		pressing the manual memory key.
		You tried to select an embroidery pattern or change the layout when
20		the needle was down.
		The machine is turned on while the needle is lowered and the
		embroidery unit is attached.
21		You tried to initialize the embroidery unit with the embroidery foot
		lowered.
		A pattern was being retrieved from a USB flash drive (USB flash
		memory) containing more than 200 embroidery patterns (including
22		folders).
		In addition, this message will appear if embroidery patterns containing
		many colors have been saved on the USB media, even if it contains
		data for no more than 200 patterns (including folders).
		The start/stop button was pressed after selecting a pattern which is
23		saved in the machine's memory or entered from the USB port without
		pressing	(Retrieve key).
				5
24		The reverse/reinforcement stitch button, needle position button or
		thread cutter button was pressed while the bobbin winder shaft is
		moved to the right.
25		A pattern is being saved.
26		The start/stop button or reverse/reinforcement stitch button was pressed
		when no pattern is selected.
27		Bobbin thread has run out.
		Little bobbin thread remains.
28		When the embroidery unit is attached.

Troubleshooting 195