Brother 885-V95/V96/V97/V98 operation manual Entering the pattern data, 132

UTILITY STITCHES ———————————————————————————————————————————

Entering the pattern data

Follow the pattern drawn on the grid sheet and program the pattern into the sewing machine.

a Attach monogramming foot "N".

•For details, refer to "Replacing the presser foot" (page 43).

b Press (Utility stitch key) on the

operation panel, and select .

c Check the grid sheet set, and specify the coordinates of the first point.

Specify the coordinates using, and

then press .

d Specify whether single stitching or triple stitching will be sewn between the points.

is single stitching, and gives triple stitching.

e Specify the coordinates of the second point,

and then press .

fRepeat steps d through e to specify each point.

•If you make a mistake entering a point, press

, and the previous point is erased.

Memo

￿If you want to edit the pattern, press . You can insert, delete and move points if you have entered at least two points.

For details, refer to "Editing the pattern data" (page 133).

g After all points have been entered, press .

￿The embroidery screen appears.

h Specify the various stitching settings, such as reverse/reinforcement stitching, in the same way as with other stitches.

• To revise the pattern, press .

Memo

￿The pattern you entered can be saved for later use. For details, refer to "Saving patterns" (page 129).

132