Brother DCP-185C, DCP-145C manual Press Mono Start or Colour Start

Error Message	Cause	Action
No Paper Fed	The machine is out of paper or	Do one of the following:
	paper is not properly loaded in the	„ Refill the paper in the paper tray, and then
	paper tray, or the Jam Clean Cover
		press Mono Start or Colour Start.
	is not closed properly.
		„ Remove the paper and load it again and then
		press Mono Start or Colour Start. (See
		Loading paper and other print media
		on page 8.)
	The paper is jammed in the	See Printer jam or paper jam on page 66.
	machine.
Out of Memory	The machine's memory is full.	When copy operation is in progress, press
		Stop/Exit and wait until the other operations in
		progress finish and then try again.
	The memory card or USB Flash	Delete unused files from your memory card or
	memory drive you are using does	USB Flash memory drive to make some free
	not have enough free space to scan	space and then try again.
	the documents.
Paper Jam	Paper is jammed in the machine.	Remove the jammed paper by following the
		steps in Printer jam or paper jam on page 66.
		See Printer jam or paper jam on page 66. Make
		sure the paper length guide is adjusted to the
		paper side.
Print Unable XX	The machine has a mechanical	Open the scanner cover and look on the left,
	problem.	middle and right hand side under the covers for
	—OR—	any foreign objects inside the machine. If the
		error message continues, disconnect the
	A foreign object such as a clip or
		machine from the power source for several
	ripped paper is in the machine.	minutes then reconnect it.
Scan Unable XX	The machine has a mechanical	Open the scanner cover and look on the left,
	problem.	middle and right hand side under the covers for
	—OR—	any foreign objects inside the machine. If the
		error message continues, disconnect the
	A foreign object such as a clip or
		machine from the power source for several
	ripped paper is in the machine.	minutes then reconnect it.
Unusable Device	A broken device has been	Unplug the device from the USB direct interface,
	connected to the USB direct	then press On/Off to turn the machine off then
	interface.	on again.
Unusable Device	A USB device or USB Flash	Unplug the device from the USB direct interface.
Please Disconnect	memory drive that is not supported
USB Device.	has been connected to the USB
	direct interface.
	For more information, visit us at
	http://solutions.brother.com.
Wrong Paper Size	Paper is not the correct size.	Make sure the machine's Paper Size setting
		matches the size of paper you are loding in the
		tray. Load the correct size of paper, and then
		press Mono Start or Colour Start.

64