Chapter 4
32
Using a scanned paper document as
your watermark 4
aEnter the number of copies you want.
bPress aor b to choose
Watermark Copy.
Press OK.
cPress dor c to choose On.
dPress aor b to choose
Current Setting.
Press OK.
ePress aor b to choose Scan. Press OK
and set the page that you want to use as
a watermark on the scanner glass.
fPress Mono Start or Colour Start.
gTake out the watermark document you
scanned and load the document you
want to copy.
hPress dor c to change the
Transparency of the watermark.
Press OK.
iIf you do not want to change any
additional settings, press MonoSta rt or
Colour Start.
Note
You cannot enlarge or reduce the
scanned watermark.
Setting your changes as a
new default 4
You can save the copy settings for Quality,
Enlarge/Reduce, Brightness,
Contrast and Page Layout that you use
most often by setting them as the default
settings. These settings will stay until you
change them again.
aPress a or b to choose your new setting.
Press OK.
Repeat this step for each setting you
want to change.
bAfter changing the last setting, press a
or b to choose Set New Default.
Press OK.
cPress + to choose Yes.
dPress Stop/Exit.
Restoring all settings to the
factory settings 4
You can restore all the settings you have
changed back to the factory settings. These
settings will stay until you change them again.
aPress a or b to choose
Factory Reset.
Press OK.
bPress + to choose Yes.
cPress Stop/Exit.