Brother DCP-383C, DCP-387C Scan to a memory card or USB Flash memory drive

Printing photos from a memory card or USB Flash memory drive
49
5
Setting your changes as a
new default 5
You can save the print settings you use most
often by setting them as the default settings.
These settings will stay until you change
them again.
aPress a or b to choose your new setting.
Press OK.
Repeat this step for each setting you
want to change.
bAfter changing the last setting, press a
or b to choose Set New Default.
Press OK.
cPress + to choose Yes.
dPress Stop/Exit.
Restoring all settings to the
factory settings 5
You can restore all the settings you have
changed to the factory settings. These
settings will stay until you change them again.
aPress a or b to choose
Factory Reset.
Press OK.
bPress + to choose Yes.
cPress Stop/Exit.
Scan to a memory card
or USB Flash memory
drive 5
Entering Scan mode 5
When you want to scan to a memory card or
USB Flash memory drive, press ( Scan).
The LCD shows:
Press a or b to choose Scan to Media.
Press OK.
If you are not connected to your computer
only the Scan to Media selection will appear
on the LCD.
(See Scanning for Windows® or Macintosh®
in the Software User’s Guide on the CD-ROM
for details about the other menu options.)
Scan to Image
Scan to Image
SCAN
Scan to OCR
Scan to OCR
Scan to File
Scan to File
Scan to E-mail
Scan to E-mai l
Scan to Media
Scan to Media
Select & Press OK
Scan a document
Scan a d ocum ent
directly to a media
direc tly to a me dia
card or USB
card or USB
flash
flash
memory.
memory.